Description
Osmio Zero Reverse Osmosis System – Smart and efficient reverse osmosis filter and kettle producing high-quality water with zero installation and easy maintenance. Highly recommended for households or workplaces with 4 people or less.
Water Temperatures
The system can provide the following osmotic level water with organic calcium and magnesium active ceramic:
Normal temperature water (approx. 25°C), ideal for direct drinking
Warm water (40°C – 50°C) ideal for baby food
Hot water (80°C – 88°C) ideal for coffee
Nearly boiling water (90°C – 98°C) ideal for tea – PLEASE NOTE – the system reaches 100% but then travels through the dispenser and so reduced to around 92°C- 95°C. A great tip for hotter dispensing is to first select 100°C Setting, and let the water get hot and make your mug hot. Then press stop and empty that out, then go again with a new 100°C press and the results are much better.
Portable water filter, countertop water dispenser, best kettle ever!
✓ The only pure water kettle on the market and 80% more energy-efficient than a regular kettle!
✓ Simply plug and play! No need for any installation! So easy!
✓ Thousands of times purer than traditional gravity filters or jug filters.
✓ Replaces your kettle by also producing reverse osmosis quality water, ambient, warm, hot or boiling at your fingertips!
✓ Filters cold water and has a boiler for dispensing instant nearly boiling water
✓ Very compact and can be put anywhere
✓ Uses flow monitoring to detect filter life and alarm, plus fail safe built in to never dispense bad water.
How to recycle and dispose of Osmio Zero water filters:
✓Quick-Change activated carbon filter and Quick-Change membrane 50GPD filter: these two filters can be placed in plastics recycling. However, the bottom of the filters will first need to be cut open using a hacksaw. The carbon and membrane elements can then be removed and thrown into the bin before placing the filters in recycling.
✓Quick-Change Sediment filter: This can simply be placed into the plastics recycling.
✓Quick-Change Insertion filter: This filter should again be cut in half and the contents emptied out into the bin before recycling the plastic exterior.
Simply un-box, plug in and fill the water tank from your tap. Place it back into the system and turn the dial to adjust the temperature and press to dispense, that’s it! Within minutes you will have reverse osmosis quality water, ambient, warm, hot or boiling at your fingertips!
Warranty
3 year free repair warranty for customers in the UK.
Customers within the Northern Ireland, Republic of Ireland as well as the following EU coutries: Austria, Belgium, Czech republic, Denmark, France, Germany, Netherlands, Luxemburg, Slovakia, Slovenia, Spain, Italy, and Hungary can also take advantage of this service but they are required to ship the system directly back to the manufacturer (no free returns).
Manufacturer also offer repairs after 3 years for a small cost.
*Please see section 7 in the manual for warranty terms.
Filter change frequency
If you have a hardness level over 250 Calcium Carbonate then you may need to change the carbon block and membrane more frequently than every 6 months. The unit is designed to shut off if there is a blockage in the membrane or prefilters. As the system recirculates the rejected water from the membrane, the TDS level continually rises of the water entering the membrane filter. Therefore, for those with water of higher TDS, more frequent carbon block and membrane changes are likely. It is recommended to have at least a spare carbon filter and membrane on hand with the unit at all times.
Changing the filters is really quick and easy. They come off and go back on with a simple twist function.
The colour coded LED instantly shows when the filtration has completed. The intelligent, automatic, power-saving motor design, gives instant supply of filtered water, and automatically shuts off when filtration is complete.
The system has an automatic shutdown mode, after 1h the device switches off automatically, so you save power!
Filter Stages
1 – Quick-Change Sediment Filter 5μm: removes coarse particles, e.g. Sand, rust, chlorine, lime
2 – Quick-Change activated carbon filter: removes chlorine and organic impurities
3 – Quick-Change Membrane 50GPD: removes all pollutants and flavours to almost 100%
4 – Quick-Change Insertion Filters: Hygiene After-filter antibacterial calcium and magnesium bioceramics, adding a small 10-20 ppm of minerals.
Osmio’s latest compact, portable and countertop reverse osmosis water filter – Osmio Counter Top Water Dispenser
Weight & Dimensions:
Height: 38 cm
Width: 18 cm
Depth: 41 cm (approx 50 cm including drip tray)
7kg weight
Maximum Bottle Height with Tray in position: 22cm
Maximum Bottle Height without Tray in position: 24cm
Capacity:
Up to 190 litres daily (at 20 ° C water temperature)
Flow Rate: 7.8 Litres Per Hour (at 20 ° C water temperature)
Capacity Water tank capacity: 5 litres to fill
Capacity Osmosis water tank: 1.5 litres approximately – 8-20 minutes to refill (depending on how blocked the carbon and membrane filters are)
Power:
Power connection required: DC 220-240V, 50Hz
Power Rating: 2200W – 2600W
Nominal heating power 2180W – 2580W
The osmosis system consumes in standby only under 0.5 watts thanks to the ERP2 power supply
With booster pump DC 24V and water pump
Including flush valve
Integrated automatic shut-off: As soon as the storage tank is filled, the water production stops.
Normal wear and tear. We suggest the system should be replaced after 5 years.
Filter changes:
Filter changes recommended by the manufacturer: every 6 months
Quick-Change filter: filter changes are very easy!
